Flash Air Dryer Manufacturer in Rajkot
Ronak Engineering a leading Flash Air Dryer Manufacturer in Rajkot since 2003. The company exports its products in various countries in the world. Advanced technology and processing have improved the quality of the hammer mill.
Overview of Flasher Air Dryer
The sawdust flash dryer is new type design of biomass material drying equipment widely used in Wood Briquette Plant factory. Know as pipe dryer, it is a good choice for solid raw material which has good flowability. The suitable biomass material moisture content for making Wood Briquette and Biomass Briquettes is 8%-17%. This efficient wood dryer can process material with an initial moisture content below 50%.
STRUCTURE AND WORKING PRINCIPLE
The whole wood drying machine mainly consists of hot wind stove, material feeder, drying pipe, dying cyclone, cyclone separator, and controlling system. When the sawdust passes through the pipeline, the wet moisture will be removed from the material and the dried sawdust is discharged from the cyclone separator. This drying machine adopts two times circulate heating system, strengthening the heat and mass transfer rate, material moisture at 50% can be dried into the requirement of making wood briquettes at one time, greatly save the labor. We have two types of sawdust dryer for the customers to choose from.
REMARKABLE ADVANTAGES OF PIPELINE DRYING MACHINE
- 1. Adopt the hot air jet self-priming device, automatic feeding
- 2. Fast heat flow velocity, the material is fully mixed, excellent drying effect
- 3. Large intensity of drying, short drying time
- 4. Big capacity, high thermal efficiency, energy-efficient, and labor saving
- 5. Simple structure, small occupation area, easy to install and repair
MACHINE SPECIFICATION
| CAPACITY | FOR 2 TONS | FOR 1 TON |
| Production Input Capacity | 2200-2400 Kgs. Per/Hr. | 1000-1200 Kgs. Per/Hr. |
| Production Output Capacity | 1800 to 2000 Kgs. Per/Hr. Depend On Moisture Content |
800 to 1000 Kgs. Per/Hr. Depend On Moisture Content |
| Production Cost Per Ton | $ 8 USD to $ 10 USD | $ 4 USD to $ 6 USD |
| Total Power Requirement | 40 HP Consumption | 30 HP Consumption |
We also manufacture products such as Briquetting Plant, Crusher Cum, Hammer Mill.
For more details regarding our products and services please contact us at +91 2827 252300, +91 96876 15656, +91 99133 77377, +91 87584 77377 or write us at [email protected].