FLASH AIR DRYER AGRICULTURE WASTE DRYER MACHINE
OVERVIEW OF SAWDUST FLASH DRYER
The sawdust flash dryer is new type design of biomass material drying equipment widely used in Wood Briquette Plant factory. Know as pipe dryer, it is good choice for solid raw material which has good flow ability. The suitable biomass material moisture content for making Wood Briquette and Biomass Briquettes is 8%-17%. This efficient wood dryer can process material with initial moisture content below 50%.
SAWDUST FLASH DRYER STRUCTURE AND WORKING PRINCIPLE
The whole wood drying machine mainly consists of hot wind stove, material feeder, drying pipe, dying cyclone, cyclone separator and controlling system. When the sawdust pass through the pipeline, the wet moisture will be removed from the material and the dried sawdust is discharged from the cyclone separator. This drying machine adopts two time circulate heating system, strengthening the heat and mass transfer rate, material moisture at 50% can be dried into the requirement of making wood briquettes at one time, greatly save the labor. We have two types of sawdust dryer for the customers choose.
REMARKABLE ADVANTAGES OF PIPELINE DRYING MACHINE
- 1. Adopt the hot air jet self-priming device, automatic feeding
- 2. Fast heat flow velocity, material is fully mixed, excellent drying effect
- 3. Large intensity of drying, short drying time
- 4. Big capacity, high thermal efficiency, energy-efficient and labor saving
- 5. Simple structure, small occupation area, easy to install and repair

FLASH AIR DRYER AGRICULTURE WASTE DRYER MACHINE
PIPE DRYER APPLICATION
- 1. Drying the wet saw dust into optimal moisture (8-14%) for making wood briquettes.
- 2. Drying the biomass material to the moisture (8-17%) for making biomass wood pellets
- 3. Drying the wet wood flour into best moisture (below 15%) for making WPC products
- 4. Essential drying equipment in wood or biomass briquetting plant.
SCOPE OF SUPPLY
SR.NO. | FOR 2 TON | FOR 1 TON |
01 | 12 Feet Conveyor with Gear Box and 2 HP Havells Motor. | 8 Feet Conveyor with Gear Box and 2 HP Havells Motor. |
02 | Rotary Valve with Reduction Gear Box 2 HP Havells Motor. | Rotary Valve with Reduction Gear Box 2 HP Havells Motor. |
03 | Blower with 25 HP Havells Motor. | Blower with 20 HP Havells Motor. |
04 | Conveyor Belt 12 Feet with Gear Box and 2 HP Havells Motor. | Conveyor Belt 8 Feet with Gear Box and 2 HP Havells Motor. |
05 | 150 Feet Long Pipe for Running Raw Material. | 125 Feet Long Pipe for Running Raw Material. |
06 | Furnace System L X W X H =5X 11 X6 | Furnace System LX W X H= 5X 11 X6 |
07 | Input Conveyor System with Heater 1 HP | Input Conveyor System with Heater 1 HP |
08 | Sleeve 2HP Havells Motor | Sleeve 2HP Havells Motor |
MACHINE SPECIFICATION
CAPACITY | FOR 2 TONS | FOR 1 TON |
Production Input Capacity | 2200-2400 Kgs. Per/Hr. | 1000-1200 Kgs. Per/Hr. |
Production Output Capacity | 1800 to 2000 Kgs. Per/Hr. Depend On Moisture Content | 800 to 1000 Kgs. Per/Hr. Depend On Moisture Content |
Production Cost Per Ton | $ 8 USD to $ 10 USD | $ 4 USD to $ 6 USD |
Total Power Requirement | 40 HP Consumption | 30 HP Consumption |